High/Low Kit Diagram

Pictured is one side of a High/Low HID Headlight Kit.

1. Disconnect vehicles [-] terminal on the battery.

2. Remove the factory headlight bulb.

3. Install the HID Headlight bulb (do not touch).

4. Connect the high/low control plug from the bulb to the relay.

5. Connect the headlight plug to the ballast.

6. Connect the ballast plug to the control relay.

7. Connect black wire to vehicle ground.

8. Connect OEM headlight plug to control relay plug.

9. Connect red fused wire to 12V + of vehicle battery.

10. Repeat bulb install on other side of vehicle.

11. Reconnect [-] terminal on the battery.

12. Test and do 10 minute burn in.