Pictured is one side of a single beam HID headlight kit.
1. Remove factory headlight bulb
2. Install new HID bulb in headlight housing.
(Do not touch the bulb) If the bulb is touched with your hands clean bulb with alcohol before proceeding.
3. Connect the two plugs from the bulb to the igniter.
4. Connect the headlight harness to the ballast.
5. Connect the + red wire to the + on the OEM headlight plug wire.
6. Connect the - black wire to the - on the OEM headlight plug wire.
7. Repeat on other side of vehicle.
8 Turn headlights on to test and do a 10 minute burn in.
Single Beam Kit Diagram